Various density light field image coding based on distortion minimization interpolation

In recent years, the light field (LF) as a new imaging modality has attracted wide interest. The large data volume of LF images poses great challenge to LF image coding, and the LF images captured by different devices show significant differences in angular domain. In this paper we propose a view prediction framework to handle LF image coding with various sampling density. All LF images are represented as view arrays. We first partition the views into reference view (RV) set and intermediate view (IV) set. The RVs are rearranged into a pseudo sequence and directly compressed by a video encoder. Other views are then predicted by the RVs. To exploit the four dimensional signal structure, we propose the linear approximation prior (LAP) to reveal the correlation among LF views and efficiently remove the LF data redundancy. Based on the LAP, a distortion minimization interpolation (DMI) method is used to predict IVs. To robustly handle the LF images with different sampling density, we propose an Iteratively Updating depth image based rendering (IU-DIBR) method to extend our DMI. Some auxiliary views are generated to cover the target region and then the DMI calculates reconstruction coefficients for the IVs. Different view partition patterns are also explored. Extensive experiments on different types LF images also valid the efficiency of the proposed method.     

核磁共振磷谱法测定乳制品中的酪蛋白含量

基于插值法建立乳制品中酪蛋白的核磁共振磷谱定量检测方法。结果表明，该方法的检出限为0.38 g/L（信噪比（RSN）=3），定量限为1.25 g/L（RSN=10）；在5.00～35.00 g/L质量浓度范围内线性良好，相关系数R2大于0.999；加标回收率在91.94%～105.10%范围区间；日内精密度在0.65%～1.40%范围区间；日间精密度在1.40%～1.80%范围区间。对市售不同乳制品中酪蛋白含量进行检测，该方法与GB 31638—2016《酪蛋白》测定结果误差在±5%以内，满足方法可行性对比分析验证要求。该方法相比常规方法样品前处理简单、定量准确性高，大大缩短了检测时间，且有更广泛的适用性，满足乳制品中酪蛋白快速定量检测的要求。     

Magnetic Assembly of a Multifunctional Guidance Conduit for Peripheral Nerve Repair

Nerve growth conduits are designed to support and promote axon regeneration following nerve injuries. Multifunctionalized conduits with combined physical and chemical cues, are a promising avenue aimed at overcoming current therapeutic barriers. However, the efficacious assembly of conduits that promote neuronal growth remains a challenge. Here, a biomimetic regenerative gel is developed, that integrates physical and chemical cues in a biocompatible “one pot reaction” strategy. The collagen gel is enriched with magnetic nanoparticles coated with nerve growth factor (NGF). Then, through a remote magnetic actuation, highly aligned fibrillar gel structure embedded with anisotropically distributed coated nanoparticles, combining multiple regenerating strategies, is obtained. The effects of the multifunctional gels are examined in vitro, and in vivo in a 10-mm rat sciatic nerve injury model. The magneto-based therapeutic conduits demonstrate oriented and directed axonal growth, and improve nerve regeneration in vivo. The study of multifunctional guidance scaffolds that can be implemented efficiently and remotely provides the foundation to a novel therapeutic approach to overcome current medical obstacles for nerve injuries.     

Microstructure,tribological behavior and magnetic properties of Fe−Ni−TiO2 composite coatings synthesized via pulse frequency variation

The Fe−Ni−TiO₂ nanocomposite coatings were electrodeposited by pulse frequency variation. The results showed that the nanocomposite with a very dense coating surface and a nanocrystalline structure was produced at higher frequencies. By increasing the pulse frequency from 10 to 500 Hz, the iron and TiO₂ nanoparticles contentswere increased in expense of nickel content. XRD patterns showed that by increasing the frequency to 500 Hz, an enhancement ofBCC phase was observed and the grain size of deposits was reduced to 35 nm. The microhardness and the surface roughness were increased to 647 HV and 125 nm at 500 Hz due to the grain size reduction and higher incorporation of TiO₂ nanoparticles into the Fe−Ni matrix (5.13 wt.%). Moreover, the friction coefficient and wear rate values were decreased by increasing the pulse frequency;while the saturation magnetization and coercivity values of the composite deposits were increased.     

某福利院一起肠炎沙门菌食源性疾病的调查分析

目的 对某福利院一起肠炎沙门菌食源性疾病进行调查和溯源,为研究相关食源性疾病提供参考。方法采用流行病学、食品卫生学和脉冲场凝胶电泳(PFGE)同源性分析等方法,分析本次食源性疾病事件。结果 确认本次事件中病例23名,患病率5.65%(23/407)；现场采集病例肛拭子15份和厨房工作人员肛拭子3份、留样菜品3份、水果2份以及冰棒1份,其中从11份病例肛拭子中检出肠炎沙门菌,PFGE结果显示11株肠炎沙门菌的DNA条带图谱相似性为96.4%,聚类分析为同一型,结合流行病学调查,初步判断菌株来自同一克隆系。结论 综合流行病学、食品卫生学和实验室检测结果,确定为一起肠炎沙门菌引起的食源性疾病,福利院应加强对特殊人群的饮食安全管理,制定相应的食源性疾病突发事件应急处理预案,防止此类事故再发生。     

Flow modeling of high-viscosity fluids in pipeline infrastructure of oil and gas enterprises

Today, the issues related to solving the problem of finding an effective distribution of oil flows through the system of oil pipelines in order to reduce the total energy consumption are relevant. The solution to this problem is connected with selection of rational pumping modes for various technological sections of oil pipelines using modern methods of mathematical programming or new techniques for improving the energy and transport characteristics of oil.Reducing energy consumption during pumping of crude through oil trunk pipelines can be achieved by various methods. Numerous investigations in this direction are mainly carried out to save energy on separate single-line pipelines. However, due to the development of the network of trunk oil pipelines in the world over the past decades, the issues of energy efficient management of oil flows throughout the entire oil pipeline system of oil and gas enterprises become urgent.This paper analyses parameters for pipeline transport of high-viscosity and heavy oils. The article proposes a method for assessing the rheological properties of oil for further planning of pumping taking into account the preservation of oil quality and an increase in energy and transport characteristics. The proposed solutions and tasks for predicting changes in the viscosity-temperature characteristics of the flow for blends of different oil types are especially relevant in the current conditions of an increase in the share of oil production with complex rheological characteristics. Results of the presented investigations may be used for planning the measures of efficient transportation of high-viscosity and heavy oils.     

ZnO Nanoplatelets with Controlled Thickness: Atomic Insight into Facet-Specific Bimodal Ligand Binding Using DNP NMR

Colloidal nanoplatelets (NPLs) and nanosheets with controlled thickness have recently emerged as an exciting new class of quantum-sized nanomaterials with substantially distinct optical properties compared to 0D quantum dots. Zn-based NPLs are an attractive heavy-metal-free alternative to the so far most widespread cadmium chalcogenide colloidal 2D semiconductor nanostructures, but their synthesis remains challenging to achieve. The authors describe herein, to the best of their knowledge, the first synthesis of highly stable ZnO NPLs with the atomically precise thickness, which for the smallest NPLs is 3.2 nm (corresponding to 12 ZnO layers). Furthermore, by means of dynamic nuclear polarization-enhanced solid-state ¹⁵N NMR, the original role of the benzamidine ligands in stabilizing the surface of these nanomaterials is revealed, which can bind to both the polar and non-polar ZnO facets, acting either as X- or L-type ligands, respectively. This bimodal stabilization allows obtaining hexagonal NPLs for which the surface energy of the facets is modulated by the presence of the ligands. Thus, in-depth study of the interactions at the organic–inorganic interfaces provides a deeper understanding of the ligand–surface interface and should facilitate the future chemistry of stable-by-design nano-objects.     

Computational modelling of water flow inside laboratory Knelson concentrator bowl

Enhanced gravity concentrators such as Knelson concentrator (KC) are extensively used in the mineral processing industry. The complexities of KC bowl geometry and variation of feed characteristics have forced process engineers to design empirically new units using laboratory and pilot-scale Knelson concentrators. However, numerical modelling methods such as computational fluid dynamics (CFD) and discrete element method (DEM) provide a better insight of flow behaviour of fluid and particulate solid phases inside these processing units. This article reports findings of CFD simulations for single-phase water flow inside the laboratory KC. An available standard 7.5-cm laboratory KC bowl was numerically simulated using realisable k-ε turbulence model to resolve the turbulence dispersion of existing transitional flow regime. The effects of relative centrifugal force (RCF) intensity and bed fluidisation water flow rate on the water velocity and pressure distributions were studied. Simulations confirmed the swirling flow pattern governing inside the bowl. The results revealed that the impact of RCF intensity on the water field values is greater than that of bed fluidisation water flow rate. Both velocity and pressure variations inside the bowl rings followed a linear trend.     

核磁共振方法研究油水过渡带驱替特征

目前,利用常规手段难以对低含油饱和度油水过渡带进行开采,利用气驱及化学驱方式开采仍具有开发潜力,但对于不同类型的油水过渡带,其开发机理不明确。开展4组天然岩心驱替实验,利用核磁共振技术研究不同类型油水过渡带中剩余油的启动机理和主要分布状态,在此基础上研究油水过渡带的开发特征。实验结果表明,气驱开发方式更适用于低渗岩心;化学驱的乳化及降低表面张力作用对小孔隙中剩余油有较好的动用程度,提高采收率效果显著。     

聚乙烯亚胺氨基化磁性氧化石墨烯的制备及其对活性艳红X-3B的吸附

使用改性hummers法制备出氧化石墨烯(GO),通过水热法在GO上生长磁性CoFe₂O₄,再使用聚乙烯亚胺(PEI)进行氨基改性,制备出聚乙烯亚胺氨基化磁性氧化石墨烯(PEI-MGO)。使用X射线衍射仪(XRD)和扫描电子显微镜(SEM)对PEI-MGO的结构和微观形貌进行表征。结果表明:纳米级尖晶石相CoFe₂O₄均匀分散于GO上,且氨基改性成功。探讨了PEI-MGO对水体中活性艳红X-3B的吸附性能。结果表明:在活性艳红X-3B初始质量浓度为150mg/L、体积为100mL、吸附剂质量为0.04g、pH值为1、吸附时间为60min时达到平衡,平衡吸附量为361.15mg/g。PEI-MGO对活性艳红X-3B的饱和吸附量为470.58mg/g。磁分离和磁回收研究表明,PEI-MGO能快速从水体中分离,回收率为98.6%。